You can review all our products below.
Systems we use in our products.
Patented easy mounting system is available in all modular sliding systems. Thanks to this system, the covers do not need to be lifted in place. It gives the installer a great advantage. The deformation to be experienced during the assembly of the covers is minimized.
In some of our models, screw mounting of the upper and lower slide system rails can be screwed (MKN003, MKN004, MKN1650, MKN005). Thanks to the rail mounting clips, the rails can be clipped and mounted on tables without being screwed on. In this way, bad screws are not seen on the rails. The installer knows where to install the rail and does not make mistakes.
The system in the door retarders is a double spring oil absorption system. In this way, the cap does not stop sharply. Cover deceleration takes place within a certain process. Therefore, the possibility of derailing is reduced when the door is stopped. In addition, the possibility of incontinence is eliminated thanks to the double spring system in the tube.
The positions of the retarders have been redesigned in the MKN 1650 sliding system. Retarders are not on the track but on the track. In this way, the bearings in the upper mechanisms enter the bottom of the slower one during the deceleration of the door, eliminating the possibility of the door coming out.